Cold Bend Test Chamber

 

  • The apparatus will be able to bend the sample backward and forward in a direction perpendicular to the plane of the conductors, the two extreme positions making an angle of 90° on both sides of the vertical.
  • Rate of flexing will be 60 per minute. A flexing is a movement through 180°.
  • A weight having mass of 0.5 kg will be provided with suitable grips for hanging to the sample.
  • The apparatus will have a provision for fixing the sample of tinsel cord (Flat) in the apparatus.
  • A 6 Digit reset able type counter with battery back-up (rechargeable) for retaining the information in case of power failure up to 72 hours will be provided for counting each flexing cycle.
  • The  standard motors used in the apparatus.
  • The apparatus will be able to operate on single phase 230 V, 50 Hz. AC supply.

Technical Specifications

SIZE:
As per requirement.
TEMPERATURE RANGE: (-) 40 Deg. C.
TEMPERATURE UNIFORMITY:
 +/- 1 Deg. C.
TEMPERATURE ACCURACY:
 +/- 1 Deg. C
CONTROL SYSTEM :
 PID (WITH PROGRAMMER)

 cold band test chamber