|
DIGITAL FORCE SYSTEM - POWER FACTOR METER COs (theta) Single Phase AE
- FREQUENCY METER 45-55 Hz.
- Temperature Rise Digital with SENSORS.
- R.P.M. Counter 9999 R.P.M.
- Variable Transformers 5 Amps 0 - 270 Volts.
- This system is suitable for the testing and to measure B.H.P. & NO/LOAD full Load torque of motors capacity upped 1/4 H.Pnot over than 2800.
- With Rope & Pulley Method.
Load - Load will be air cored inductor with taps and resistor bank, to obtain all test currents from 6 A to 40 A at 0.875 Pf.
- Duty cycle will be 1 sec./14 sec. & 1 sec./29 sec. (rating based).
- Reactor Shunt load of 0.6% will be provided.
Test Stand - Test stand will have electro pneumatic mechanism for MCB operation fitted with 24 V DC solenoid valve and flow controls, for one device at a time.
- All control interconnections between 3 equipment are included for distances within 3 meter.
|
|
|
APPARATUS FOR MEASUREMENT OF CURRENT AND TRIP-TIME IN MAGNETIC VERIFICATION BENCH FOR MCB's. This apparatus consist of following: - 0- Timer 9.99 second least count 0.01 sec. for controlling the current duration.
- The supply sources up to 400 A (LOW VOLTAGE).
- Digital time interval meter .9999 seconds. 0.0001 sec. for trip time & Auto reset.
- Time sensing through Resistance of high accuracy (i.e., 0.1) in series with current source of 5 A to eliminate the delay which is present in the secondary side of C.T. circuit.
This signal is to be used for feeding transient meter T/M needs presence of signal for 1 m/S. to register current measurement correctly. This current recording is possible. Transient meter for measurement of current duration and trip time measurement. - 4 terminal 0.5%, 0.1-ohm resistor.
- Digital Ampere Meter Shunt operated hold on facility 750 A/50 mVolt.
- Mounting station for MCB.
- Digital Ampere Meter
- Complete system is housed in powder coated chassis.
- Current source up to 700 Amps.
|
28-Day Test Apparatus (As Per IS: 8828 : 1996) SAMPLE SIZE: 3 Nos.
MAXIMUM CURRENT CAPACITY: As per requirement.
SYSTEM CURRENT CAPACITY: As per requirement.
SYSTEM PROGRAM: 21 Hours ‘ON’ - 3 Hours ‘OFF’
CURRENT SET UP: Set up is meant to carryout current at any value From 6 Amps. to 60 Amps.
12 CHANNEL DIGITAL Temp.: To measure the terminal
INDICATOR temperature : 199.9 Deg. C
DIN FIXTURE : For mounting 3 Nos. M.C.B.
STEP DOWN TRANSFORMER: Capacity (Voltage) Max. -50 Volts - Current – 60 Amps
VOLTAGE STABILIZER : Servo type suitable capacity. SUITABLE LOAD WILL BE PROVIDED. Digital mili Volts meter to pressure power load. |
|
THERMAL TRIP APPARATUS (Calibration Bench 2 Station) Testing of 6 Amps to 63 Amps MCB at 3 In. Min, current 15 Amps for 6 Amp M.C.B. and Max. current 200 Amp for 63 Amp M.C.B. Testing fixture with connecting cables (suitable up to 200 Amp) (without servo stabilizer) With Digital Timer and Start Stop feature with current meter. |
|
Conducting performance tests on products requires dedicated Electrical Panels with appropriate metering... Conducting performance tests on products requires dedicated Electrical Panels with appropriate metering. Our producys consists of a wide range of custom built Electrical Panels. Electro-mechanical Endurance Test Systems for a range of products and applications. Low Energy (<500J) Capacitor Discharge Spot Welding machines for precision welding applications. Constant Wattage Control Gear (Ballasts) for high power UV Lamps used in Exposing and Printing applications, ranging from 2kW up to 20kW. |
|
|
|
|
Page 3 of 3 |
Electrical
